|
Product Details:
Payment & Shipping Terms:
|
| Machine Name: | Aluminum Radiator Brazing Furnace | Energy: | Electric |
|---|---|---|---|
| Muffle Length: | 4 Meter | Shape: | Round |
| Working Size: | 1200 * 250 Mm | ||
| High Light: | continuous brazing furnace,furnace brazing equipment |
||
Round Fluxer Aluminium Radiator Continuous Brazing Furnace 304 Stainless Steel
Application
The aluminium radiator brazing furnace is used to braze aluminum heat exchangers such as radiators, intercoolers, evaporators,
and heater radiator under protective nitrogen atmosphere. The flux used is NOCOLOK flux.
Build Up
The CAB aluminum radiator brazing furnace is comprised of the following parts: round shape fluxer, flux mixing and supply device, the drying oven, the front curtain chamber, the preheating oven, the brazing oven, the air cooling chamber, the rear curtain chamber, the air blast chamber, the driving system, the water and gas pipeline, the electrical control system.
Parameters of Aluminium Radiator Brazing Furnace
| Mesh belt operation surface height (to the ground) | 900mm |
| Mesh belt speed | 200～1000mm/min (inverter frequency conversion); |
| Effective working size | 1200mm (wide)×250mm(height above mesh belt) |
| Brazing oven effective working size | 7000mm (L)×1200mm (W)×250mm (H); |
| Preheating oven effective size | 4000mm (L)×1200mm(W)×250mm(H) |
|
Brazing oven effective size |
6000mm(L)×1200mm(W)×250mm(H) |
| Total production line length | 36.7M |
| Total power |
Electric power: 270KW Full power at temperature rising up, 60% at the brazing stage; ≤60% |
| Gas consumption | Max 66M3/H; about 52m3/h at operation; |
| 99.999% nitrogen supply | 200m3/h (actual consumption: 90-120m3/h) |
Technical Parameters of Round Fluxing Chamber
Fluxing chamber is the first parts of aluminium radiator brazing furnace. The brazing furnace can have a successful brazing based on the condition of an even fluxing.
| Mesh belt operation height | 900mm |
| Effective working size | 1200mm (wide) ×250mm (straight height above mesh belt) |
| Conveyor chain | SUS304 (Horseshoe Chain) |
| Fluxing chamber | 400mm |
| Air blowing chamber | 600mm |
| Front entrnace | 1500mm |
| Manual coating area | 1500mm |
| Total length | 4M |
Flux Spraying Device
| Taiwan diaphragm pump: 2 sets |
| Flux nozzle type and distance: double-row; front and rear nozzle overlapping spraying; right-left distance: 200mm |
| Flux nozzle quantity: 13 pieces |
air blowing device
| High-pressure fan: model: 9-19; |
| Power: N = 7.5KW; |
| The height of spray nozzle to parts surface can be adjusted from 50 mm to 150 mm away from workpiece surface |
Flux tank, 1 set;
| Size: (304 stainless steel) : Φ900mm *600mm (flux spray supply tank) |
|
Mixer set: 1 set
100 mesh filter net is installed to prevent impurities from entering the diaphragm pump |
Our company mainly supplies the radiator making machines such as radiator aluminium brazing furnace, aluminum fin machine, core builder, radiator plastic tank crimping machine, air leak tester, header mold, plastic tank mold, etc.
Advantages
All stainless steel 304 fluxing chamber and reinforced structure of the body can ensure long-term trouble-free use of spraying machine.
The fluxing can spray brazing flux to the core and the header. The easily dismantled nozzles can spray the workpiece accurately according to the requirements.
The aluminium radiator brazing furnace is designed with a manual coating area between the fluxing chamber and the drying oven.
The cylindrical design of the fluxing chamber of the furnace ensures that no accumulation of flux occurs during the collection process. In this way, the overall running cost of the aluminum radiator brazing furnace is saved.
The height of the air knife of the spray high-pressure fan can be adjusted to remove the excess flux better. The CAB aluminium radiator brazing furnace has a low running cost.
Contact Person: Ms. Ruth
Tel: +0086 15305299442
