|
Product Details:
Payment & Shipping Terms:
|
| Machine Name: | Radiator Fin Machine | Max Effective Width: | Max 310mm |
|---|---|---|---|
| Fin Height: | 3 - 24mm | Fin Die Closing Height: | 136 Mm |
| Stamping Force: | 4200 Kgs | Coil Number: | 1 Coil |
| High Light: | fin making machine,fin press machine |
||
One Coil Aluminum Radiator Fin Machine Stamping Wavy Fin 120 SPM 300mm Wide
Introduction
Stamping type radiator fin making machine is able to produce aluminum radiator fins by stamping mechanism.
Each time the decoiler is loaded with one coil. It is widely used for automobile industry, power plants, etc.
General Specification
| Aluminum strip thickness: customized |
| Fin width: 114mm, Max effective fin width : 310mm |
| Raw material: 4343/3003/4343 Aluminum alloy strip coil: H14 |
| Power supply: 3Phase, 415V, 50Hz |
| The equipment is set with safety signs |
| Control loop current: 24V DC |
| Equipment power: 4.5KW; control system power: 120W |
| Disruptions caused by equipment: < 5.0 % |
| Scrap caused by the equipment:< 0.5 % |
| Mold replacement time: < 0.5 hour for skilled workers; |
| Acceptance standard: CPK: ≧1.67 |
| Mold closing height: 136mm |
| Working speed: 120SPM |
| Fin punch life: 3 million fins |
| PLC preserved with 10% space and one interface |
|
The fin accuracy can meet Chinese national standard H±0.02 The equipment is PLC controlled. PLC functions include: fin counting, speed adjustment, cutting movement control, fault removal, and alarm (for phase shortage, material run-out, material blockage, and door protection) |
| All documents are both in Chinese and English language. |
Technical Parameters
| Mold | CPJG14*10 | ||
| Control system power | 4.5KW | ||
| Power supply | 3P;415V±10%;50Hz±2% | ||
| Air source | Compressed air 0.5-0.8Mpa; flow rate: 0.00004m3/min; | ||
| Machine accuracy | Levelness of highest point of lower mold table | mm | ≤0.03 |
| Levelness of lowest point of lower mold table | mm | ≤0.03 | |
| Levelness of mold table at ascent | mm | ≤0.03 | |
| Levelness of mold table at descent | mm | ≤0.03 | |
| Vertical stroke | mm | 14 | |
| Punching force | Kg | 4200 | |
| Fin specification | Fin (height*pitch) | mm | According drawing |
| Max effective fin width | mm | 310 | |
| Max fin height | mm | 24 | |
| Aluminum strip width | mm | 114 | |
| Machine speed | Inverter control | SPM | 120 |
| Max cutting speed | Inverter control | Times/min | 60 |
| Stamping machine dimension | L*W*H | mm | 1500*900*1650 |
| Noise | db(A) | 80 | |
| Weight | kg | 1700 | |
Company Introduction
Our company mainly supplies the aluminum radiator making machines such as radiator aluminum fin machine, radiator core
builder machine, radiator plastic tank crimping machine, radiator air leak tester, header and side plate die, plastic tank die, etc.
We need to receive the product drawings before making an accurate quotation.
Contact Person: Ms. Ruth
Tel: +0086 15305299442
