Payment & Shipping Terms:
|Product Name:||Aluminum Radiator Brazing Furnace||Energy:||Electric|
|Muffle Length:||6 Meter||Mesh Belt Wide:||1200 Mm|
|Mesh Belt Height:||250 Mm||Speed:||200 - 1000 Mm/min|
continuous brazing furnace,
furnace brazing equipment
6 Meter Auto Aluminium Radiator Brazing Furnace 1200 * 250 mm
The radiator aluminium brazing furnace works under nitrogen protective atmosphere, and welds aluminum workpieces with non-erosive brazing agent. Objects able to brazed: automobile radiator, tubular type automobile condenser, parallel flow type condenser, evaporator, overlapping type evaporator, aluminum oil cooler, etc.
The equipment is comprised of liquid storage tank, flux spraying chamber, drying furnace, brazing frunace front curtain chamber, brazing furnace, water cooling chamber, brazing furnace exit curtain chamber, air blast chamber, driving system, electrical control, and nitrogen inlet and outlet pipes.
Fluxing Chamber of CAB aluminium brazing furnace
The surface flux of the product is uniformly adhered, no leakage, and the surface excess flux is blown off; and the
header has a manual coating space. The header coating area is also equipped with a recycling barrel for the flux.
|Overall dimension: 2500mm(L)×1190mm(W)×2030mm(H)|
|Effective driving chain width: 800mm(W)(material: 1Cr18Ni9Ti)|
Driving belt speed adjustment range: 100—500mm/min
(Delta inverter with frequency conversion speed adjustment and torque control)
|Driving power N﹦1.1KW|
the parts are well dried by the drying oven, and the dried parts are an important precondition of
a high quality brazing process.
|Furnace type: conveyor belt type continuous furnace ( belt width: 800mm)|
|Max working temperature: 350℃|
|Temperature control zone: 1 zone|
|Temperature control: solid state PID control;|
|Temperature controller: SHIMADEN , Japan;|
|Effective size: 800mm(W)×200mm(H)|
Overall dimension: 4000mm(L)×1670mm(W)×1700mm(H), 1 set
The brazing heating furnace is the most important parts of the radiator aluminium brazing furnace line.
|Overall dimension: 6000mm(L)×1870mm(W)×1700mm(H)|
|Casing: 1.5mm thick steel plates with reinforcing sectional steel|
|Heating component: OCr25Al5 heating components ( mounted above and below the muffle with easy replacement), 1 set|
|Muffle: upper SUS-304, lower SUS-316L(thickness: 8mm), 1 set|
|(2 pieces of nitrogen discharge pipe inside the muffle)|
|Thermal coupling: 1 piece of thermal coupling ( measuring the hearth temperature)(Nicr-Nisi), 1set|
|Refractory lining: high temperature fiber and fiber products|
water cooling chamber, 1 set
exit curtain chamber, 1 set
air blast chamber, 1 set
brazing furnace driving device, 1 set
electrical control system, 1 set
pipeline, 1 set
Contact Person: Manager