Payment & Shipping Terms:
|Machine Name:||Radiator Core Builder Machine||Working Principle:||Semi-automatic Operation; Tube Dispencer|
|Machine Mechanism:||Servo And Pneumatic Type||Time Needed For 1 Core:||About 3.5 Mins One Core|
|Machine Size:||2500*2300*1800mm||Machine Weight:||2800kg|
servo Aluminum Radiator Core Builder,
servo automatic Radiator Core Builder,
4 Rows automatic Radiator Core Builder
Aluminum Radiator Core Builder Machine
Application of Aluminum Radiator Core Builder Machine
The radiator core builder assembles together the flat tubes, fins, headers, and side plates, and assemble them into a radiator core.
The radiator core builder machine is used for assembling radiator cores. The aluminum radiator core builder machine has the advantages of stable and reliable working performance, easy operation, low noise, accurate positioning of flat tube center, and even distribution of fins. The assembled radiator core has a high assembling accuracy and a good appearance, which ensures a better brazing effect in the brazing furnace.The aluminum radiator core builder machine is mainly comprised of header mold, side plate positioning block, core clamping mechanism, flat tube silo, flat tube distribution mechanism, comb teeth mechanism, driving mechanism, work table, work table up-down mechanism, and electrical control system.
Technical Parameters of Aluminum Radiators
radiator fin height: 8.03mm
core diagonal line tolerance:±1mm;
Core height: ±1mm, core width: ±1.5mm;
Distance between fin end and header plate: 2±1mm (could be adjusted through the positioning block).
equipment mechanical movement time: 55s
According to the customer’s requirement, the assembly table is preserved with the aluminum fixture hole.
Safety device: photoelectric light curtain to protect the safety of the operator.
Equipment body: industrial gray; dangerous area: light yellow.
Technical Parameters of Aluminum Radiator Core Builder Machine
|Core Dimension||Core height direction||350-780mm|
|Core width direction||200-680mm|
|Flat Tube Layers||1 layer/2layers|
|Tube Laying Mode||Double working position|
|Flat Tube Flaring Mode||Automatic /Manual|
|Fin Laying Mode||By fin tray /Manual|
|Production Capacity||Around 40sets/hour|
|Drive mode||Servo and Pneumatic|
Picture of Radiator Core Builder Machine we make:
Contact Person: Manager