Payment & Shipping Terms:
|Name:||Vacuum Pressure Impregnation Equipment||Motors To Be Treated:||HV And LV Motor Windings|
|Impregnation Tank Diameter:||900MM To 5000MM||Working Pressure:||0.6Mpa Or Above|
|Impregnation Tank Material:||345R Steel||Vacuum Degree:||-5000Pa To -100Pa|
vacuum pressure impregnation plant,
vacuum pressure impregnation system
Motor Windings Varnish Vacuum Pressure Impregnation Equipment Max Dia 5000 mm
The VPI series vacuum pressure impregnation equipment impregnates the workpieces in a sealed tank under a certain pressure,
which forces the impregnant to immerse more completely into the gaps of the workpieces. The equipment is specially used for
impregnation of windings of high voltage motors, traction motors, special motors, anti explosion pump motors, magnetic motors,
and transformers. The windings after impregnation in VPI equipment have an improved insulation performance,
a reduced surface temperature, an improved mechanical strength, a reduced fault rate, a better anti-moisture capacity, and a long
The impregnating tank cover is opened and closed with the help of a hydraulic mechanism. The signal is feedback through non-contact proximity switch. The tank cover opening angle follows the rule that the top point of the opened cover passes over the inner wall of the impregnating tank.
The impregnating tank is equipped with a level transmitter.
The impregnating tank is equipped with an over-pressure alarm, and a pressure safety device.
The impregnating tank is designed with one anti-explosion peephole light and one observation window.
The impregnating tank of the vacuum pressure impregnation equipment is sealed by a silicon rubber ring.
When the impregnating tank cover is opened, the tank has safety interlock mechanism.
The impregnating tank is a vertical type.
The impregnation tank is equipped with a infrared camera so as to check the working performance of the tank.
|Model||Diameter of Impregnation Tank||Nominal Volume of Impregnating Tank||Vacuum Degree||Working Pressure||Floor Area|
Note: PLC automatic control. The equipment is in the vertical type. Horizontal type can also be supplied
if thus requested by the customer
The company mainly supplies the following products: VPI series vacuum pressure impregnation equipment, FGH vacuum impregnation drying machine, vacuum impregnation pressurized impregnation equipment, water-curtain type paint spraying chamber, assembly conveyance line, energy-saving drying ovens, baking ovens, and others.The above products are widely used for impregnation treatment of windings of motors, electrical equipment, high voltage motors, traction motors, special motors, pump motors, magnetic motors, and transformers. The equipment is a newly energy-saving equipment, which greatly improves product quality, reduces production cost, and strengthens competitiveness.
Contact Person: Manager