Payment & Shipping Terms:
|Name:||Aluminium Radiator Brazing Furnace||Mesh Belt Speed:||200-1000mm Depending On Furnace Size|
|Brazing Area Length:||10m||Rated Working Temperature:||650 Degree Celcius|
|Cooling Method:||Air Cooling||Protective Atmosphere:||Nitrogen|
continuous brazing furnace,
furnace brazing equipment
CAB Electric Aluminium Radiator Brazing Furnace 1000 - 250 - 10000MM
This aluminium radiator brazing furnace can be used to braze auto aluminum radiators.
RRODUCTIVITY &CAPACITY (Typical Size)
Production line can be available to continuous brazing the following parts.
|Product Type||Width(mm)||Length(mm)||Depth(mm)||Required Piece/Hour|
SCOPE OF SUPPLY
Front Curtain Chamber system
Air Cooling System
Rear Curtain Chamber
Air Blast System
|Maximum Usable Height About Mesh-belt||250mm|
|Mesh-belt Speed Range||200-1000mm/min|
|Loading Surface Height||850mm|
|Power||Rated Power: 700KW|
|Total Length||About 47meters|
1) The aluminum radiator brazing furnace adopts high performance porcelain fiber cotton material for heat preservation purpose.
The furnace is able to rise to 630℃ from the ambient temperature in around 2 hours.
2) The muffle of the brazing oven is once-formed by the large size bending machine, and is made from Sweden 316L steel plate
and 304 steel plate. 8M muffle is formed by one-time bending, and only there is one v-slot at the bottom of the muffle. The complete
muffle is only with 2 side welding lines. The one-time forming muffle could reduce the misshapening effect at welding and also
deformation at the heating process.
3) The zones of the brazing furnace are divided based on upper, lower, rear and back area. The heating power is adjusted through
power and voltage regulator so that the furnace could achieve an ideal temperature uniformity of ±1℃. The brazing area could
achieve a temperature uniformity of ±2℃ so that it could meet the brazing requirements.
4) The temperature controller has the PID regulation function to achieve a smooth temperature rise. Also the temperature controller
has the over-temperature alarm. The mesh belt is steplessly regulated through the inverter. The driving mechanism is started up in the acceleration manner, and stopped in the deceleration manner to reduce the tension of the mesh belt.
5) the CAB aluminium radiator brazing furnace has a complete control system integrating intelligent control, alarm and protection system.
The real-time temperature recording function provide the process data of different products.
6) The area of the fluxing chamber which contacts the flux is made of stainless steel material. The two side walls of the fluxing chamber
are both set with an observation window to observe the fluxing performance. The fluxing nozzles have a 90º fan-shape spraying to prevent
nozzle blockage. There is a filtering net for recycling the flux to prevent damage to the fluxing pump.
7) The dry air cooling room is set with a slag cleaning chamber. There is a side door of the slag cleaning chamber for allowing the worker
to clean the flux slags. In comparison to the traditional water cooling chamber, the dry cooling room don’t have the risk of corrosion because
of water and deformation of the chamber because of cold and heat. There is no need for cooling water.
8) power at temperature rising stage: 100%; power at the brazing stage: ≤60%
Our company mainly supplies the aluminum radiator making machines such as aluminum fin machine, aluminum radiator core builder,
aluminum radiator plastic tank crimping machine, aluminium radiator brazing furnace (or called as CAB brazing furnace) air leak tester,
header mold, plastic tank mold, etc.
Contact Person: Manager