Payment & Shipping Terms:
|Name:||Vacuum Pressure Impregnation Equipment||Vacuum Degree:||-0.098Mpa|
|Hot Water Wash Tank Temperature:||0-99 Degree Celsius Adjustable||Diameter:||600 - 1500 Mm|
|Working Method:||Rotation Type||Cycle:||20 Mins One Basket|
vacuum pressure impregnation plant,
varnish vacuum impregnation machine
Aluminum Castings Vacuum Pressure Impregnation Equipment Max Dia 1500 mm
The vacuum pressure impregnation equipment is a right solution to leakage problem of castings. The vacuum impregnation equipment pressurizes the sealant to enter the porosities of castings, and then cures them. The castings are sealed, and qualified to contain liquids or gas.
The vacuum pressure impregnation equipment for castings are widely used at military, automobile, ships, and other relevant fields.
The equipment is the most ideal equipment for solving leakage problem.
The equipment is mainly used for leakage repair of castings, sealing of porous powder metal products after sintering,
improvement of insulation property of electrical components, and pre-treatment before galvanizing and plating.
|impregnating tank: 1 piece|
|sealant storage tank, 1 piece|
|refrigeration device, 1 set|
|centrifugal swing dryer, 1 piece|
|wash tank, 1 piece (2 grades)|
|hot water cure tank, 1 piece|
|vacuum pump, 1 set|
|drain tank, 1 piece|
|basket, 8 pieces|
control cabinet, 1 set
|pneumatic system, 1 set|
|pipes and valves, 1 set|
|working platform: 1 set|
|paint color: red or otherwise required by the customer|
|Effective Size (mm)||600||800||1000||1200|
|Effective Height (mm)||700||1000||1250||1500|
|Vacuum Degree (Pa)||<100||<100||<200||<200|
|Overall Height (mm)||1300||1500||1800||2000|
Note: The vacuum impregnation equipment is non-standard, and we could provide the equipment according
to buyer’s specific requirement.
The loading basket could be square or round in shape.
Picture of Vacuum Pressure Impregnation Equipment
Contact Person: Manager