Payment & Shipping Terms:
|Name:||Vacuum Pressure Impregnation Equipment||Impregnation Tank Size:||Dia1000×400mm|
|Application:||Impregnation Process Of Motors||Working Vacuum:||0.6Mpa|
|Hydraulic Design Pressure:||16MPa||Hydraulic System Working Pressure:||≤ 12MPa|
VPI Impregnation Equipment,
0.6Mpa Vacuum Pressure Impregnation Equipment,
VPI Impregnation Equipment For Motor Windings
VPI vacuum pressure impregnation equipment for motor windings
1.1 vacuum impregnation tank, 1 piece;
1.2 Vacuum pressure impregnation tank, round shape,
specification:Φ1000×400mm (straight edge height), 1 piece;
1.3 head: 16MnR (standard spherical head is adopted)
1.5 flange: Q235-B forging.The cylinder mouth flange is formed of
solid steel plate, and the cylinder mouth flange is under fine machining,
which is not easy to deform.
1.6 Working vacuum: atmospheric pressure ~ 500pa, installation form:
Working pressure: 0.6MPa (controllable and adjustable)
1.7 Sight glass: Φ160×100mm, 2pcs;
1.8 Sealing material: high quality rubber sealing ring, corrosion resistant.
1.9 resin return method: resin return from the bottom;
1.10 Hydraulic opening and locking of cylinder cover: The opening, closing,
loosening and tightening of the cylinder cover are hydraulically driven.
1.11 The cylinder cover is opened hydraulically, and its return signal is
connected to the switch without contact.
1.12 Sequence of opening the cylinder cover: first loosen the clamp, use
the hydraulic device to lift the cylinder cover of the impregnation tank to a
clearance of 10mm, and then rotate the cylinder cover laterally to other
positions to facilitate personnel to lift out the workpiece.
1.13 The impregnation tank is equipped with safety interlock mechanism
and pressure overpressure relief safety device.
1.14 Pressurizing medium: filtered dry air (air source provided by the customer)
The vacuum impregnation tank adopts corrosion-resistant sealing ring
(self-developed and produced), which is well sealed without leakage.
The cylinder cover is provided with a sealing ring corresponding to the
flange of the tank body. The observation window is equipped with a
special sight lamp, which can see the whole process of vacuum impregnation.
|Resin storage tank, specification||Φ1000×500 mm, 1 piece|
|Working vacuum||normal pressure.|
|The tank bottom||Provide Φ20 sampling port|
|Suction speed||28 L/S|
|Motor power||2.2 kW|
|Resin filtration system||1 set|
3.resin dipping device
The resin dipping device is installed next to the resin impregnation tank, and its conical
bottom pipe is connected with the resin storage tank. After the resin dipping process,
it enters the resin storage tank.
The vacuum pressure impregnation equipment includes resin reflux system, hydraulic
system, ventilation system and control system.
Vacuum pressure impregnation machine instruction manual (operation process,
repair, maintenance, precautions, troubleshooting, etc.), product certificate,
process flow diagram, circuit diagram, product standard name, relevant original
materials of vacuum pump, accessories, purchased parts and electrical
6. Installation and Commissioning Service
varnish vacuum pressure impregnation machine is installed on the base plate
and installed as a whole.
The motor impregnator equipment is already tested before delivery. After the motor coil vacuum
impregnation equipment arrives at the customer's site, it can work only by connecting to the power supply.
Base plate size: 5000 * 2000 mm (length * width)
Contact Person: Manager