|
Product Details:
Payment & Shipping Terms:
|
| Name: | Bell Type Heat Treat Furnace | Effective Size: | Diameter 1500 * Height 2000mm |
|---|---|---|---|
| Application: | Steel Wire Annealing Process | Rated Power: | 230KW |
| High Light: | 1500mm electric annealing furnace,1500mm bright annealing furnace,SS321 bell annealing furnace |
||
Bell Type Dia 1500 Height 2000mm Annealing Heat Treatment Furnace
1.Application of Electric Heat Treat Furnace heat treat furnace
The strong convection bell type heat treatment furnace is a batch type resistance furnace, which can be operated continuously with multiple furnaces. It is mainly used for heat treatment of machine parts such as coil wires and wires, and can also be used for heat treatment of other workpieces under the environment below the rated temperature. The electric heat treat furnace has good thermal cycle and uniform temperature. The temperature control system uses PID zero crossing trigger thyristor, and Shanghai Guolong programmable high precision intelligent meter to control temperature. The furnace has good stability, and uses paperless recorder to automatically record temperature, with U disk recording and over temperature alarm dual control, to ensure that the workpiece does not exceed the temperature. Automatic interlock control is adopted for each mechanical transmission part of electric bell type furnace to ensure operation safety.
2. Main design parameters of bell type heat treatment furnace heat treating furnaces/resistance furnaces
| No. | Item | Specification |
| 1 | Rated heating power | 230kw + 10% (adjustable) |
| 2 | Rated temperature |
950 ℃ |
| 3 | Power supply | 380V, 3-phase, 50 Hz |
| 4 | Heating zones | 2 zones + one point temperature measurement |
| 5 | Effective working size | Ø 1500 × 2000mm (diameter × height) |
| 6 | Furnace size | Ø 1700 × 2700mm (diameter × height) |
| 7 | Temperature uniformity | ± 5 ℃ |
| 8 | Temperature control accuracy | ± 2 ℃ |
| 9 | Power loss of empty furnace | ≤ 18% |
| 10 | Opening and closing of heating cover | By crane |
| 11 | Heating sides | Around the furnace |
| 12 | Temperature of furnace surface | ≤ 45 ℃ + room temperature |
| 13 | Charging mode | the workpiece is hoisted on the hearth for heating |
| 14 | Temperature control mode | PID SCR, Changzhou Huibang temperature controller, paperless recorder, over temperature alarm |
| 15 | Furnace lining | refractory fiber |
| 16 | Heating element |
0cr25al5 |
| 17 | Furnace bottom plate |
321 stainless steel plate |
| 18 | Furnace configuration | 1 furnace body, 2 seats, 2 muffle tanks, 1 cooling cover |
| 19 | Protective atmosphere | nitrogen |
| 20 | Pressure in inner cover | Keep positive pressure |
| 21 | Circulation fan |
Power: bipolar 8/34KW; |
4.Scope of supply of heat treat furnace heat treating furnaces/resistance furnaces
| No. | Item | Q’ty | Remarks |
| 1 | Heating furnace body | 1 set | Including steel structure, lining, heating element,and porcelain nails |
| 2 | Strong convection seat | 2 sets | Including circulating fan |
| 3 | Stainless steel muffle tank | 2 sets | 321 stainless steel |
| 4 | Cooling hood | 1 set | Including 0.75KW fans. 3sets |
| 5 | Special lifting tool for furnace | 1 set | Steel structure and anchoring chain |
| 6 | Centralized gas supply valve rack system | 1 set | Including the flow meter, solenoid valve, the manual valve |
| 7 | Heating element | 1 set | Resistance band |
| 8 | Vacuum pump | 1 set | 2X-70 |
| 9 | Temperature control system | 1 set | |
| 10 | Control cabinet | 1 set | 2000X800X600mm |
| 11 | Changzhou Huibang instrument | 3 pcs | |
| 13 | SCR | 6 sets | |
| 14 | Compensating wire | 100 meters | |
| 15 | Thermocouple | 3 pieces | Type K 0-1100 |
| 16 | Supporting electrical components | 1 set | Contactor air switch ammeter voltmeter thermal relay switch etc |
| 17 | Technical documents | 1 copy | |
| 18 | Foundation drawing | 1 copy | |
| 19 | Electrical schematic diagram of temperature control system | 1 copy | |
| 20 | Electric furnace operation manual | 1 copy | |
| 21 | Electric furnace certificate | 1 copy |
Picture of electric heat treat furnace in our workshop:
heat treating furnaces/resistance furnaces
Contact Person: Ms. Ruth
Tel: +0086 15305299442
